I have a simple K-line or kkl line vag-com cable. K-line or kkl line and FreeSSM: should work!
VCDS 409.1 SOFTWARE DRIVER
The FTDI driver deems to have installed ok on my windows 10 laptop, and i am using the correct COM port in FreeSSM. All that happens when i plug it into the car is the red light on the dongle lights up, but nothing else. I bought a “KKL VAG-COM 409.1 OBD2 II OBD” cable from eBay UK here: Auto Diagnostic Tool USB Cable KKL VAG-COM 409.1 OBD2 II OBD VW/Audi/Seat/Skoda | eBayĪnd have tried to use it with FreeSSM (and romraider logger, but don’t know if i’m using that right) with no success – test connection fails, and trying to read from ecu results in the message “No or invalid answer from ECU”. KKL VAG-COM 409.1 OBD2 cable and FreeSSM: No success! Hoping to read fault codes from my UK model Subaru Outback 2010 2.0 Diesel Many VAG-COM cables now come with a CH340 chipset, which will NOT work. When buying a cable, make sure the vendor guarantees that it’s the FTDI chipset. … you definitely need a VAG-COM cable that uses the FTDI chip for FreeSSM to work. I cannot see the chip (serial number) from the Terminal command ( ls tty* )Īs freessm_user indicated on of this thread: Unscrewed the VAG-COM adapter to verify the chipset with a magnifying glass and sure enough… its a CH340 chipset inside and NOT FTDI.
VCDS 409.1 SOFTWARE PRO
I purchased a VAG-COM 409.1 cable and have wasted many hours trying to get this to work using FreeSSM within Wine ( virtual Windows ) on my MacBook Pro running Sierra OSX. VAG-COM cables with a CH340 chip and FreeSSM: NOT work ( One has to wonder what gains or losses you might get by doing that on a stock setup.) I have Noted that ECU Flash show many features that can be disabled for off road use. My goal is to tune this engine via Program tweaking. And in so many steps on each of the ways. It was amazed that Subaru program can be reprogram in so many ways. It ran about 30 miles before going into limp mode. So far no luck connecting with ECUFLASH or Rom Raider. KKL VAG-COM 409.1 interface and FreeSSM: WorkedįreeSSM Works for me with a KKL VAG-COM 409.1 interface.
Model year 2010 is already supported, too, but some Measuring Blocks may be missing and some Diagnostic Codes may not be displayed as plaintext. WRX + STi), Forester®, Exiga® and Tribeca® starting with model year 1999 up to model year 2009. Legacy®/Liberty®/Outback®/Baja®, Impreza® (incl. After some researches, I’ve found the following compatible models: I’ve ordered a VAG-Com Cable with FTDI chip to use FreeSSM. VAG-Com Cable with FTDI chip and FreeSSM: Worked
VCDS 409.1 SOFTWARE MANUAL
When you are in Manual mode no hesitation. It has a hesitation when you take off in D. I am trying to trouble shoot the problematic CVT. I can connect to the ECU but not the TCU. I have a Vag-Com cable (FTDI) and FreeSSM. Look here: reviews of FreeSSM working with VAG-COM It’s possible to use a VAG-COM cable with Subaru FreeSSM software?
0 kommentar(er)
